Alpha Blend Pots, 500K-ohm
7,50 €
Taxes non incluses.
Disponibilité: En stock
SKU
4138
Our unique linear-taper pots control the signal mix from two pickups or sources, panning from one source to another.250K vs. 500K
Generally, 500K-ohm pots are used with humbuckers and 250Ks are used with single-coil pickups. You can use any value you like, but a 250K will give a slightly warmer tone than a 500K pot. The 250K pot bleeds off (attenuates) some of the high frequencies to ground.
To see the knobs available for these pots, click here.
Generally, 500K-ohm pots are used with humbuckers and 250Ks are used with single-coil pickups. You can use any value you like, but a 250K will give a slightly warmer tone than a 500K pot. The 250K pot bleeds off (attenuates) some of the high frequencies to ground.
Shaft diameter | 6mm split shaft, coarse knurling | |
Thread | M7 x 0.75 | |
Threaded portion | 3/8" | (9.52mm) |
Required mounting hole diameter | 9/32" | (7.14mm) |
Flat washer and two mounting nuts included | ||
To see the knobs available for these pots, click here.
Envoi par avion autorisé | Oui |
---|---|
CITES | Non |
Write Your Own Review
PLUS DE StewMac
- Neck Shaping Templates for Electric Guitar - 1954 Tele16,47 €Taxes non incluses.
- Limes à sillets - 1/8" (3.18mm)35,19 €Taxes non incluses.
- Inlay Filler Colors - Rosewood (Burnt Umber)15,00 €Taxes non incluses.