Alpha Blend Pots, 250K-ohm
Prix normal 7,50 € Prix spécial 6,38 €
Taxes non incluses.
Disponibilité: En stock
SKU
4137
Our unique linear-taper pots control the signal mix from two pickups or sources, panning from one source to another.250K vs. 500K
Generally, 500K-ohm pots are used with humbuckers and 250Ks are used with single-coil pickups. You can use any value you like, but a 250K will give a slightly warmer tone than a 500K pot. The 250K pot bleeds off (attenuates) some of the high frequencies to ground.
To see the knobs available for these pots, click here.
Generally, 500K-ohm pots are used with humbuckers and 250Ks are used with single-coil pickups. You can use any value you like, but a 250K will give a slightly warmer tone than a 500K pot. The 250K pot bleeds off (attenuates) some of the high frequencies to ground.
Shaft diameter | 6mm split shaft, coarse knurling | |
Thread | M7 x 0.75 | |
Threaded portion | 3/8" | (9.52mm) |
Required mounting hole diameter | 9/32" | (7.14mm) |
Flat washer and two mounting nuts included | ||
To see the knobs available for these pots, click here.
Envoi par avion autorisé | Oui |
---|---|
CITES | Non |
Write Your Own Review
PLUS DE StewMac
- Tournevis d’ajustement de la barre de réglage, via la rosace, pour trou de 5mm, simple courbure, avec portée de 2”Prix normal 17,90 € Prix spécial 15,22 €Taxes non incluses.
- Cordon abrasif “Mitchell”, Lot de 4Prix normal 36,00 € Prix spécial 30,60 €Taxes non incluses.
- Tournevis d’ajustement de la barre de réglage, via la rosace, pour trou de 5mm, simple courbure, avec portée de 4-1/2”Prix normal 17,90 € Prix spécial 15,22 €Taxes non incluses.