Taxes non incluses.
En stock
SKU
M003471
Neck Mounting Ferrules
For bolting a neck onto a contoured solidbody when a flat neck attachment plate is impractical.
5/8"-diameter counterbored holes required. Supplied in packages of 12.
Mounting screws sold separately.
We recommend using a Fisch Forstner Bit, or brad-point drill bit to recess these neck bolt ferrules to 3/16" standard depth (this may vary according to instrument design). If you're drilling the holes before applying finish, use a 5/8" diameter bit—it'll make a slightly oversized hole to allow for finish thickness in the recess. Use a 15mm bit if you plan to fit the ferrule with no finish in the recess.
Envoi par avion autorisé | Oui |
---|
Write Your Own Review
PLUS DE StewMac
- Limes à sillets - 1/8" (3.18mm)31,09 €Taxes non incluses.
- Neck Shaping Templates for Electric Guitar - 1954 Tele16,01 €Taxes non incluses.
- Inlay Filler Colors - Rosewood (Burnt Umber)12,85 €Taxes non incluses.