Taxes not included
Availability: In stock
The best for inlay work! Solid carbide lasts far longer than steel, and reverse spiral flutes cut downward for cleaner, "no fuzz" edges in routed cavities.
Width of cut 3/32" (2.38mm)
Depth of cut 1/4" (6.35mm)
Each bit is 1-1/2" (38.10mm) long with a 1/8" (3.18mm) shank for Dremel and other rotary tools.
Use a larger inlay bit for removing wood in the middle of your inlay work, and save this bit for the fine details. The fine detail bits are fragile, for routing intricate details only.
|Air shipping allowed||Yes|
Write Your Own Review
MORE FROM StewMac
- Aluminum Radius-sanding Beam, 9" Long, 7-1/4" radius€118.00Taxes not included
- StewMac Aluminum Radius-sanding Beam, 9" long, 9-1/2" radius€118.00Taxes not included
- StewMac Aluminum Radius-sanding Beam, 9" Long, 12" radius€118.00Taxes not included