An easy mod for your volume control to get more uniform guitar tone from 1 to 10.Hand-soldered here in our shop: a 150K-ohm 1/4-watt resistor (1% tolerance) in parallel with a .001uF capacitor. Wire this simple mod between the input and output lugs of your guitar volume control pot, to smooth out treble bleed. Get more uniform tone from 1 to 10, and a more rounded sound at low volume. Available with ceramic or Orange Drop®
Hear the difference in TradeSecrets Issue 182
Due to the small size of the resistor, we recommend using Alligator Clip Heat Sinks
when soldering this circuit in place.
For modding original caps, see our #7373 150K-ohm 1/4-watt Resistor