Solvent-based paint stripper gel with high stripping power for nitrocellulose, water-based, polyurethane, synthetic paints or varnishes, etc...
1L
Flammable product.
Cannot be shipped outside the European Union.
Clear, solvent-based paint remover gel with high removal power. It does not contain acid or alkaline products and therefore respects the painted surface, not producing corrosion on the metal or altering the colour of the wood. Due to its special thixotropy it does not drip.
Apply a fairly thick film of the product with a brush, leaving it to act for 5 to 15 minutes. Then remove the diluted mass using a spatula. NEVER APPLY WITH A SPRAY GUN.
If the paint is very hard or old, it is advisable to grate it, making lattice cuts, before application and repeat this operation several times, as the product slowly attacks and dissolves the layer or layers of paint.
Before repainting the stripped surface, it must be thoroughly cleaned using solvent.
The product should not be left on the surface to be stripped for more than one hour as it will form a hard layer.
Air shipping allowed | No |
---|---|
CITES | No |
- Nitorlack® Nitrocellulose Lacquer Black Gloss€18.00Taxes not included
- Nitorlack® Polyurethane Varnish Black Gloss€28.00Taxes not included
- Nitorlack® Polyurethane Varnish Fiesta Red€28.00Taxes not included