The easiest way to spray a professional finish!
Produces a beautiful traditional nitrocellulose lacquer finish, without elaborate spray equipment.
ColorTone® Clear Aerosol Guitar Lacquer is formulated especially for musical instruments. Fast-drying and resistant to alcohol and water, it produces a hard, durable finish that enhances the beauty of the wood.
Available in convenient 13-ounce spray cans.
ColorTone® Nitrocellulose Guitar Lacquer can be applied over smooth bare wood, sanded basecoats of grain filler, ColorTone Sealers, and over ColorTone Stains. Perfect for touch-up work, or for finishing an entire instrument. The rotating-tip nozzle can spray a horizontal or vertical pattern.
ColorTone® Sealers have a high solids content for quickly building a finish and provide excellent adhesion for lacquer topcoats. They're are flexible and compatible with many different finish types. We recommend Vinyl Sealer as the perfect all around sealer that works well for any project. It's moisture-resistant and works for opaque, translucent, and metallic finishes, as well as refinishing projects and oily woods.
For spraying a transparent finish on new wood, many use Sanding Sealer as a base, followed with ColorTone lacquer.
Some builders will spray a coat of White Vinyl Sealer to create an opaque undercoat for a metallic or solid color finish.
Aerosol spraying is an economical way for the beginner to apply a first finish without elaborate setup or equipment. Aerosols produce a slightly rougher surface than spray guns, however, and more sanding may be needed for a level surface.
How many cans do you need?
Number of cans needed may vary depending on how heavy the coats are applied, number of coats, and desired thickness on your instrument.
Clear Satin typically requires fewer coats. Successive thin coats should be sanded to maintain a level surface. Don't sand the final coat; the flattener in the lacquer will give a smooth satin appearance.
We recommend spraying multiple thin coats, in a low humidity environment. Heavy-bodied Sanding Sealer (one coat equals two coats of lacquer) will seal stained or unstained wood before the color coats or clear topcoats are applied. At least one can of Sanding Sealer and 4-6 cans of lacquer will usually finish a complete guitar.
|Use warm lacquer, not cold!
Pro shops spray heated lacquer because cold lacquer spatters, requiring extra sanding. You should warm up your aerosol lacquer too, simply soak them in a sink of warm tap water.
|Name||ColorTone Aerosol Guitar Lacquer, Clear Gloss|
|Air shipping allowed||No|